In this post, we’ll share some details about a recent job we completed for a client who was having trouble with their bore. The original system had failed, leaving them without a reliable water supply, so we stepped in to help get things flowing again.
When a bore fails, it doesn’t just stop supplying water. It can cause major disruption, whether it’s for a home, farm, or business. That’s exactly what happened on a recent job we completed. The original bore was no longer viable, and with no water coming through, we needed to act fast to restore supply.
Locating a New Water Source
We brought in a specialist drilling subcontractor to help locate a new water source. Using a combination of geological expertise and, traditional divining rods, they identified a new location and got to work drilling the new bore hole.
Upgrading the Pipe System
The old bore had been fitted with galvanized steel pipe in six metre sections. These pipes are heavy, can rust over time, and are difficult to remove or maintain. Using our specialist mini-crane truck, we pulled out the old pipework and installed a flexible riser pipe.
This flexible pipe comes in one continuous length. On this site, we measured and cut it to around 80 metres, then used a roller to guide it smoothly into the bore. This method is quicker, easier, and avoids the need for trucks or heavy lifting gear.
Benefits of the flexible riser pipe:
-
No corrosion or rust
-
Faster to install
-
Fewer joints and fittings to worry about
-
Simpler to maintain in the future
We sized and connected a suitable bore pump, capable of pulling the water up from 80metres below ground to the storage tank. The pump size depends on how much water is needed, how big the bore is, how far down the water is, and how far it needs to be pumped. We always choose suitable pump brands for each application. This site used a Grundfos SQE.
Power and Water Delivery
With the new bore pump in place, we connected power and electrical connections, and dug a delivery line trench to carry the water from the new bore to where it was needed on site. The result is a modern, efficient setup that’s built to last.
Testing and Planning
After the bore was setup, we carried out tests to check the pH, nitrates, and mineral content. This step is important because the type of water treatment needed depends on how the water will be used. Water for household use might require different filters compared to water for farm or stock use
This project is a great example of how older bore systems can be improved with modern technology. If your bore pump is under performing, or if you’re concerned about your water quality, we’re happy to help.